EasyManuals Logo

Cisco Linksys E4200 Supplemental Information

Cisco Linksys E4200
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
North America Model UL or cUL, CEC Level 5 YES
European Model LVD or CB N/A
Japanese Model PSE N/A
Singapore Model PSB N/A
Australian Model C-tick, MPES N/A
China Model CCC N/A
Requirement Will Comply
Support drop-out of one AC cycle with impact to customer YES
Non-volitle Memory Will not be corrupted do to power fluctuation YES
Return to normal when AC voltage return to normal without user
intervention
YES
Deploy a current limiting device that will not generate open flame in an
over-voltage failure.
YES
Withstand a short term (30 sec. Max) high voltage condition up to 240
VAC
YES
Protect itself from high or low voltage when restored to normal would not
be prevented.
YES
Protect itself form high voltage occurrences and then restore itself without
assistance once the power has returned to normal range.
YES
Withstand interruptions of power of varying duration under certain
environmental conditions that will not negatively impact the operation of
the device
YES
Resume normal operation within the standard start-up times under all
condition
YES
Does not emit any spurious interference under all operating condition YES
Withstand a 1,000 volt surge combination wave per IEEE C62.41 within
Outcome 1 as described in IEEE 61.45
YES

Other manuals for Cisco Linksys E4200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Linksys E4200 and is the answer not in the manual?

Cisco Linksys E4200 Specifications

General IconGeneral
Wireless Standard802.11a/b/g/n
Frequency Bands2.4 GHz and 5 GHz
USB Ports1 x USB 2.0
Antenna TypeInternal
Wired Speed10/100/1000 Mbps
Ethernet Ports4 x 10/100/1000 Mbps LAN
Security FeaturesWPA/WPA2
Maximum Data Rate450 Mbps (5 GHz)
Weight0.32 kg

Related product manuals