Cisco Linksys RV042 User Manual

Linksys RV042 Setup
5
Instruction # 42-IS-0160, Rev A1
21. Click the System Management Tab, then click the diagnostic tab below.
Type www.google.com
into the Ping host or IP address. Click Go. After a few moments
the screen should show Test Succeeded. If the test fails, double-check the VPN routers
IP address settings and cable connections.
22. Under the DHCP tab, verify that the Enable DHCP Server checkbox is not
checked.
23. Click the VPN tab, then click PPTP server below.
24. Click the checkbox to enable PPTP server. Under Range Start, enter the address
192.168.191.224. Under Range End enter 192.168.191.228.

Cisco Linksys RV042 Specifications

General

WAN Ports	2
LAN Ports	4
VPN Tunnels	50
Form Factor	Desktop
Firewall	Yes
VPN Support	Yes
VPN Protocols	IPSec, PPTP
Firewall Type	SPI
Authentication	MD5, SHA1
QoS	Yes
Throughput	100 Mbps
Encryption	DES, 3DES, AES
Weight	0.5 kg