© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 48
Figure 4. Logical Switch Created on Microsoft SCVMM and Instantiated on Microsoft Hyper-V Hosts
A Logical Switch template definition contains the information shown in Figure 5.
Figure 5. Logical Switch Defines a Set of Uplink Profiles and Port Classifications
Uplink profiles and port classifications are explained in the next sections of this document.
Note: When a Cisco Nexus 1000V Logical Switch is created on Microsoft SCVMM, only one extension is used.
The Cisco Nexus 1000V is used as a forwarding extension.
Note: In this release, only one Cisco Nexus 1000V Logical Switch can be created per Microsoft Hyper-V host:
that is, creation of more than one VEM per Microsoft Hyper-V host is not supported.
To Next Page
Loading...
