Cisco Nexus 1000V Series - User Manual

Installing Cisco Nexus 1000V for KVM
This chapter contains the following sections:
•
Steps to Install the Cisco Nexus 1000V for KVM, page 1
•
Installing and Configuring MAAS, page 2
•
Installing and Configuring Juju, page 2
•
Installing and Configuring the Cloud Archive OpenStack Services, page 3
•
Installing and Configuring the Cisco Nexus 1000V for KVM, page 4
•
Installing and Configuring the VXLAN Gateway Using Juju Charms, page 4
Steps to Install the Cisco Nexus 1000V for KVM
You can use the following high-level procedure to guide you through the installation process.
Before You Begin
•
Decide on a deployment model. See Supported Topologies.
•
Make sure that your network, servers, operating system, hypervisor, and MAAS deployment meet the
minimum requirements. See System Requirements.
•
Gather the required network information for the Juju configuration file (config.yaml file). See Canonical
documentation at this URL: http://maas.ubuntu.com/docs/install.html.
•
Gather the required network information for the global configuration file. See Preparing the Configuration
and Mapping Files.
•
Gather any unique network information for the VEMs. See Mapping File Parameters.
Procedure
PurposeCommand or Action
See Installing and Configuring MAAS, on page 2.Install and configure MAAS.
Step 1
Cisco Nexus 1000V for KVM Installation Guide, Release 5.2(1)SK1(2.2)
OL-31677-01 1

Cisco Nexus 1000V Series Specifications

General

Brand	Cisco
Model	Nexus 1000V Series
Category	Switch
Language	English