Cisco Nexus 1000V Series - Installing and Configuring the VXLAN Gateway Using Juju Charms

Before You Begin
Make sure that the Nova cloud controller is started before deploying the VXLAN Gateway charm. To start
the Nova cloud controller, use the juju status nova-cloud-controller command.
Procedure
Step 1
Deploy the VXLAN Gateway.
a)
juju deploy –u --config config-file --repository=. local:precise/vxlan-gateway
b) juju add-relation nova-cloud-controller vxlan-gateway
Step 2
Configure the VXLAN Gateway data and management interfaces.
For details, see Creating the VXLAN Gateway Data Interface and Creating a VXLAN Gateway Management
Interface.
Cisco Nexus 1000V for KVM Installation Guide, Release 5.2(1)SK1(2.2)
OL-31677-01 5
Installing Cisco Nexus 1000V for KVM
Installing and Configuring the VXLAN Gateway Using Juju Charms