Need help?Do you have a question about the Cisco Nexus 3132Q and is the answer not in the manual?
General| Model | Nexus 3132Q |
|---|---|
| Product Series | Nexus 3000 |
| Form Factor | 1RU |
| Power Supply | AC or DC |
| Operating System | Cisco NX-OS |
| Memory | 16 GB |
| Jumbo Frame Support | Yes |
| Manageable | Yes |
| Number of Uplink Ports | 32 |
| Ethernet Technology | 40 Gigabit Ethernet |
| Number of Total Expansion Slots | 0 |
| Redundant Power Supply Supported | Yes |
| Operating Temperature | 32 to 104 °F (0 to 40 °C) |
| Ports | 32 x 40 Gigabit Ethernet |
| MAC Address Table Size | 128k |
| Uplink Port | 40 Gigabit Ethernet |
| Port/Expansion Slot Details | 32 x 40 Gigabit Ethernet QSFP+ |
| Media Type Supported | Fiber |
| Layer Supported | L2, L3 |
| Power Source | AC Power Supply |
| Width | 17.3 in |
| Depth | 22.5 in |
| Latency | < 1 microsecond |
| Height | 1.72" |
Defines the intended audience for this hardware installation guide, including installers and administrators.
Lists supplementary Cisco Nexus documentation, including release notes and compliance guides.
Provides a description of the Cisco Nexus 3016 switch, including its ports and features.
Details the Cisco Nexus 3048TP switch, covering its specifications and port layout.
Describes the Cisco Nexus 3064-T, 3064-32T, and 3064-X switch models and their features.
Covers various Cisco Nexus 3132Q switch models, highlighting their port configurations and capabilities.
Explains the Cisco Nexus 3132C-Z switch, detailing its 100-Gigabit QSFP28 ports and other features.
Details the Cisco Nexus 3164Q switch, including its 40-Gigabit QSFP+ ports and airflow schemes.
Describes the Cisco Nexus 3172PQ, 3172PQ-XL, 3172TQ, 3172TQ-32T, and 3172TQ-XL switches.
Presents an overview of the Cisco Nexus 3232C switch, including its port types and airflow.
Details the Cisco Nexus 3264C-E switch, covering its 100-Gigabit QSFP28 ports and port template configurations.
Provides an overview of the Cisco Nexus 3264Q switch, including its port types and airflow.
Describes the Cisco Nexus 31108PC-V and 31108TC-V switches, including their RAM and port configurations.
Details the Cisco Nexus 31128PQ switch, highlighting its 10-Gbps SFP+ and 40-Gbps QSFP+ ports.
Specifies the operating and storage temperature ranges for the Cisco Nexus switches.
Outlines the operating and storage humidity levels for the switches and environmental control recommendations.
Explains how altitude conditions can affect switch cooling efficiency and electrical performance.
Provides guidelines to prevent dust buildup and ensure a clean operating environment for the switches.
Provides critical safety warnings and instructions for installing and servicing the Cisco Nexus switches.
Discusses various rack-mount kits and types of racks suitable for installing the Cisco Nexus switches.
Lists the necessary checks and requirements, including environmental and site conditions, before chassis installation.
Details the procedure for safely unpacking and inspecting the switch chassis for any damage or missing parts.
Step-by-step guide for installing a 1RU Cisco Nexus switch chassis into a standard four-post rack.
Instructions for installing a 1RU Cisco Nexus switch chassis into a two-post rack using specific brackets.
Provides a guide for installing a 2RU Cisco Nexus switch chassis into a four-post rack with support rails.
Details the process of installing a 2RU Cisco Nexus switch chassis into a two-post rack.
Explains the procedures for properly grounding the Cisco Nexus switch chassis for safety.
Guides the user through the steps to power up and start the Cisco Nexus switch after installation.
Considers cabling, distance limitations, and equipment needed for network connections to the switch.
Details how to connect to the switch's console port for initial configuration via CLI.
Steps to establish an IP address and create a management connection for the switch.
Guides on connecting the switch's interface ports to other network devices using various cables.
Instructions on how to properly install SFP+ and SFP transceivers into the switch ports.
Step-by-step guide for installing QSFP+ transceiver modules into the switch.
Procedure for connecting SFP+ and SFP optical cables to transceivers.
Provides guidelines for cleaning and maintaining transceivers and fiber-optic cables for optimal performance.
Instructions for safely removing and replacing the fan tray module in the Cisco Nexus switch.
Procedure for replacing a single 1RU fan module in the Cisco Nexus switch chassis.
Steps for replacing a single 2RU fan module in the Cisco Nexus switch chassis.
Guide on how to replace an AC power supply module in the Cisco Nexus switch.
Procedure for replacing a DC power supply module in the Cisco Nexus switch.
Details general specifications for cabinets and racks, including EIA standards and mounting rail spacing.
Specifies requirements for perforated cabinets, focusing on perforation patterns for cooling.
Outlines requirements for mounting switches in open racks, considering space and airflow.
Lists environmental operating and non-operating specifications for temperature, humidity, and altitude.
Provides detailed dimensions (width, depth, height) for various Cisco Nexus switch models.
Lists available AC power cables, their country-specific descriptions, and lengths.
Specifies the power cord and cord set description requirements for DC power supplies.
Details the power cord part number and description for HVDC power connections.
Provides information on chassis LEDs, their status, and descriptions for identification and operation.
Explains the status and descriptions of fan LEDs, indicating module status and potential overheating.
Details the status and descriptions of power supply LEDs, indicating operational status and faults.
Lists spare parts, including power supply options, fan options, and accessory kits for various Cisco Nexus models.
To Next Page