Cisco Nexus 3132Q - Fan LEDs

DescriptionStatusLEDComponent
The module is
booting or running
diagnostics.
The switch is
overheating. The
temperature
threshold has been
exceeded by a small
value during
environmental
monitoring.
The switch has
overheated. The
temperature
threshold has been
exceeded by a large
value during
environmental
monitoring.
If the module fails
during initial reset,
the LED continues
to blink and the
module does not
come online.
The module has a
runtime failure and
is brought offline.
Blinking (amber)
Fan LEDs
This table provides information about fan LEDs for Cisco Nexus 3000 Series switches.
Cisco Nexus 3000 Series Hardware Installation Guide
73
LEDs
Fan LEDs