Certain OpenStack and Cisco Nexus 1000V for KVM services are packaged together in another
charm Debian package that you download and install locally. For information about installing these
services, see Installing and Configuring the Cisco Nexus 1000V for KVM, on page 4.
Note
juju deploy -u --config config-file --repository=. local:precise/service
Installing and Configuring the Cisco Nexus 1000V for KVM
Perform this procedure to install and configure the Cisco Nexus 1000V for KVM on a physical server or as
a VM. To deploy the Cisco Nexus 1000V for KVM on a Cisco Cloud Services Platform, see Installing VSM
on the Cisco Nexus Cloud Services Platform.
Before You Begin
Make sure that you have defined the necessary parameters in the global configuration file and mapping file
for your deployment.
Procedure
Step 1
Deploy the primary VSM.
juju deploy –u --config config-file --repository=. local:precise/vsm vsm-primary
Step 2
Deploy the secondary VSM.
juju deploy –u --config config-file --repository=. local:precise/vsm vsm-secondary
Step 3
Deploy VEMs.
a)
juju deploy –u --config config-file --repository=. local:precise/vem
b) juju add-relation nova-compute vem
c) juju add-relation vsm:dvs vem:dvs
d) juju add-relation quantum-gateway vem
e)
(Optional) juju set vem mapping=`cat host-mapping-file `
Installing and Configuring the VXLAN Gateway Using Juju
Charms
If you want to deploy the VXLAN Gateway with the Cisco Nexus 1000V for KVM, you can install the
VXLAN Gateway using the vxlan-gateway charm. (Alternatively, you can install the VXLAN Gateway using
an ISO file. For more information, see Installing and Configuring the VXLAN Gateway.)
The VXLAN Gateway is an optional addition to the Cisco Nexus 1000V for KVM deployment.Note
Cisco Nexus 1000V for KVM Installation Guide, Release 5.2(1)SK1(2.2)
4 OL-31677-01
Installing Cisco Nexus 1000V for KVM
Installing and Configuring the Cisco Nexus 1000V for KVM
To Next Page
Loading...
