EasyManua.ls Logo

Cisco Nexus 5010 User Manual

Cisco Nexus 5010
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CHAPTER
Send feedback to nx5000-docfeedback@cisco.com
1-1
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
1
Product Overview
The Cisco Nexus 5000 Series is a family of top-of-rack switches for the data center. The Cisco Nexus
5000 Series offers high-speed Ethernet switching and supports Fibre Channel over Ethernet (FCoE) to
provide data center I/O consolidation (IOC).
The Nexus 5010 switch provides 20 fixed Ethernet ports in a 1 RU switch and the Nexus 5020 switch
provides 40 fixed Ethernet ports in a 2 RU switch. Optional expansion modules provide native Fibre
Channel ports and additional Ethernet ports.
This chapter describes the Cisco Nexus 5000 Series switches and includes the following sections:
New Technologies in the Cisco Nexus 5000 Series, page 1-1
Cisco Nexus 5000 Series Switch Hardware, page 1-3
Cisco Nexus 5000 Series Switch Software, page 1-4
Typical Deployment Topologies, page 1-7
Supported Standards, page 1-10
New Technologies in the Cisco Nexus 5000 Series
Cisco Nexus 5000 Series switches introduce several new technologies, which are described in the
following sections:
Fibre Channel over Ethernet, page 1-1
I/O Consolidation, page 1-2
Virtual Interfaces, page 1-3
Fibre Channel over Ethernet
Fibre Channel over Ethernet (FCoE) provides a method of encapsulating Fibre Channel traffic over a
physical Ethernet link. FCoE frames use a unique Ethertype so that FCoE traffic and standard Ethernet
traffic can be carried on the same link.
Fibre Channel traffic requires a lossless transport layer. Native Fibre Channel implements lossless
service using a buffer-to-buffer credit system. For FCoE traffic, the Ethernet link must provide lossless
service.
Ethernet links on Cisco Nexus 5000 Series switches provide two mechanisms to ensure lossless transport
for FCoE traffic: link-level flow control and priority flow control.

Other manuals for Cisco Nexus 5010

Question and Answer IconNeed help?

Do you have a question about the Cisco Nexus 5010 and is the answer not in the manual?

Cisco Nexus 5010 Specifications

General IconGeneral
ModelNexus 5010
Product SeriesNexus 5000
Product TypeSwitch
Form Factor1RU
Operating SystemCisco NX-OS
Jumbo Frame SupportYes
Jumbo Frame Size9216 bytes
LatencyLess than 5 microseconds
Hot Swappable FansYes
Virtualization SupportYes
Layer SupportLayer 2 and Layer 3
Memory4 GB
Power SupplyDual redundant power supplies
MAC Address Table Size32000 entries
Forwarding Capacity300 Mpps
Ports20 fixed 10 Gigabit Ethernet ports

Summary

Product Overview

New Technologies in the Cisco Nexus 5000 Series

Introduces new technologies like FCoE, I/O Consolidation, and Virtual Interfaces for the Nexus 5000 Series.

Cisco Nexus 5000 Series Switch Hardware

Details the hardware specifications of the Cisco Nexus 5010 and 5020 switches, including chassis and modules.

Cisco Nexus 5000 Series Switch Software

Covers the Cisco Nexus 5000 Series switch software, including NX-OS features like Ethernet switching and QoS.

Typical Deployment Topologies

Describes common deployment scenarios for the Cisco Nexus 5000 Series switches, such as TOR and IOC topologies.

Supported Standards

Lists the IEEE standards supported by the Cisco Nexus 5000 Series switches, including Ethernet and VLAN features.

Related product manuals