Cisco Nexus 1000V Series - Procedure; Installing and Configuring MAAS; Installing and Configuring Juju

PurposeCommand or Action
See Installing and Configuring Juju, on page 2.Install and configure Juju.
Step 2
See Installing and Configuring the Cloud Archive
OpenStack Services, on page 3.
Install and configure the Cloud Archive
OpenStack services.
Step 3
See Installing and Configuring the Cisco Nexus
1000V for KVM, on page 4.
Install and configure the Cisco Nexus
1000V for KVM.
Step 4
(Optional)
See Installing and Configuring the VXLAN Gateway
Using Juju Charms, on page 4.
Install and configure the VXLAN
Gateway.
Step 5
Installing and Configuring MAAS
You need to install and configure MAAS. For detailed information about this procedure, see the Canonical
documentation at this URL: http://maas.ubuntu.com/docs/install.html.
Procedure
Step 1
Install the following MAAS packages.
•
maas
•
maas-region-controller
•
maas-cluster-controller
•
maas-dhcp/maas-dns
Step 2
Set up the initial MAAS configuration:
a) Designate the MAAS server API URL.
b) Create a MAAS admin account.
c) Import the boot images (only necessary during the first time setup).
d) Configure DHCP.
e) Configure the immediate upstream switch to be in STP PortFast mode for fast convergence on ports in
the forwarding state.
Installing and Configuring Juju
You need to install and configure Juju. For detailed information about this procedure, see the Canonical
documentation at this URL http://juju.ubuntu.com/install.
The following procedure is required to deploy the Cisco Nexus 1000V for KVM.
Cisco Nexus 1000V for KVM Installation Guide, Release 5.2(1)SK1(2.2)
2 OL-31677-01
Installing Cisco Nexus 1000V for KVM
Installing and Configuring MAAS