40-/100-Gigabit QSFP28
ports (64)
5Beacon (BCN), Status
(STS), and Environment
(ENV) LEDs
1
Screw holes for front
mounting brackets
(four-post rack
installations)
6Lane select button2
Screw holes for
center-mount bracket
(two-post rack
installations)
7Lane LEDs3
Notch on both sides of the
chassis for locking the
power supply end of the
chassis to the bottom
support rails (four-post
rack installations).
81-/10-Gigabit SFP+ ports
(2)
4
To determine which transceivers, adapters, and cables are supported by this switch, see the Cisco Transceiver
Modules Compatibility Information document.
The following figure shows the switch features on the power supply side of the chassis.
Cisco Nexus 3000 Series Hardware Installation Guide
18
Overview
Overview of the Cisco Nexus 3264C-E Switch
To Next Page
Loading...
