Cisco Nexus 5600 Series - Page 137

Show Commands
show startup-config msdp
MCR-133
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show startup-config msdp
To display information about the startup-system configuration for Multicast Source Discovery Protocol
(MSDP), use the show startup-config msdp command.
show startup-config msdp [all]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to display information about the startup-system configuration for MSDP:
switch(config)# show startup-config msdp
all (Optional) Displays configured and default information.
Release Modification
5.0(3)N1(1) This command was introduced.