Cisco Nexus 5600 Series - Page 167

163
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter I Commands
ip igmp report-link-local-groups
ip igmp report-link-local-groups
To enable IGMP to send reports for link-local groups, use the ip igmp report-link-local-groups
command. To disable sending reports to link-local groups, use the no form of this command.
ip igmp report-link-local-groups
no ip igmp report-link-local-groups
Syntax Description This command has no arguments or keywords.
Command Default Disabled
Command Modes Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to enable sending reports to link-local groups:
switch(config)# interface ethernet 2/2
switch(config-if)# ip igmp report-link-local-groups
switch(config-if)#
This example shows how to disable sending reports to link-local groups:
switch(config)# interface ethernet 2/2
switch(config-if)# no ip igmp report-link-local-groups
switch(config-if)#
Related Commands
Release Modification
6.0(2)N1(1) This command was introduced.
Command Description
show ip igmp interface Displays IGMP information about the interface.