175
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter I Commands
restart igmp
restart igmp
To restart the IGMP process, use the restart igmp command.
restart igmp
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to restart the process:
switch(config)# restart igmp
Related Commands
Release Modification
5.0(3)N1(1) This command was introduced.
Review comment from Vishnu (vthumati), this command is not
supported.
Command Description
ip igmp flush-routes Enables flushing routes when the IGMP process is restarted.
To Next Page
Loading...
