Cisco Nexus 5600 Series - Page 182

178
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter Show Commands
show ip igmp event-history
show ip igmp event-history
To display information in the IGMP event history buffers, use the show ip igmp event-history
command.
show ip igmp event-history {clis | debugs | errors | events | ha | igmp-internal | msgs | mtrace |
policy | statistics | vrf}
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information in the IGMP HA event history buffer:
switch(config)# show ip igmp event-history ha
ha events for IGMP process
2008 Apr 12 04:01:32.339950 igmp [4588]: : Router-port PSS entry for vlan 20 upd
clis Displays events of type CLI.
debugs Displays events of type debug.
errors Displays events of type error.
events Displays events of type event.
ha Displays events of type HA.
igmp-internal Displays events of type IGMP internal.
msgs Displays events of type msg.
mtrace Displays events of type mtrace.
policy Displays events of type policy.
statistics Displays events of type statistics.
vrf Displays events of type VRF.
Release Modification
6.0(2)N1(1) This command was introduced.