204
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter I Commands
ip igmp snooping explicit-tracking
ip igmp snooping explicit-tracking
To enable tracking of IGMPv3 membership reports from individual hosts for each port on a per-VLAN
basis, use the ip igmp snooping explicit-tracking command. To disable tracking, use the no form of
this command.
ip igmp snooping explicit-tracking
no ip igmp snooping explicit-tracking
Syntax Description This command has no arguments or keywords.
Command Default Enabled
Command Modes VLAN configuration mode
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to enable tracking of IGMPv3 membership reports on a VLAN interface:
switch(config)# vlan 1
switch(config-vlan)# ip igmp snooping explicit-tracking
switch(config-vlan)#
This example shows how to disable IGMP snooping on a VLAN interface:
switch(config)# vlan 1
switch(config-vlan)# no ip igmp snooping explicit-tracking
switch(config-vlan)#
Related Commands
Release Modification
6.0(2)N1(1) This command was introduced.
Command Description
show ip igmp snooping Displays IGMP snooping information.
To Next Page
Loading...
