Cisco Nexus 5600 Series - Page 216

212
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter I Commands
ip igmp snooping optimise-multicast-flood
ip igmp snooping optimise-multicast-flood
To configure Optimized Multicast Flood (OMF) on all VLANs, use the ip igmp snooping
optimise-multicast-flood command. To remove the OMF from all VLANs, use the no form of this
command.
ip igmp snooping optimise-multicast-flood
no ip igmp snooping optimise-multicast-flood
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Global configuration mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure OMF on all VLANs:
switch(config)# ip igmp snooping optimise-multicast-flood
switch(config)#
This example shows how to remove OMF from all VLANs:
switch(config)# no ip igmp snooping optimise-multicast-flood
switch(config)#
Related Commands
Release Modification
6.0(2)N1(1) This command was introduced.
Command Description
show ip igmp snooping Displays IGMP snooping information.