Cisco Nexus 5600 Series - Page 218

214
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter I Commands
ip igmp snooping report-suppression
ip igmp snooping report-suppression
To enable limiting the membership report traffic sent to multicast-capable routers, use the ip igmp
snooping report-suppression command. To disable the limitation, use the no form of this command.
ip igmp snooping report-suppression
no ip igmp snooping report-suppression
Syntax Description This command has no arguments or keywords.
Command Default Enabled
Command Modes Global configuration mode
VLAN configuration mode
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines When you disable report suppression, all IGMP reports are sent as is to multicast-capable routers.
This command does not require a license.
Examples This example shows how to enable limiting the membership report traffic:
switch(config)# vlan 1
switch(config-vlan)# ip igmp snooping report-suppression
switch(config-vlan)#
This example shows how to disable limiting the membership report traffic:
switch(config)# vlan 1
switch(config-vlan)# no ip igmp snooping report-suppression
switch(config-vlan)#
Related Commands
Release Modification
6.0(2)N1(1) This command was introduced.
4.0(3) Global configuration mode was added.
Command Description
show ip igmp snooping Displays IGMP snooping information.