Cisco Nexus 5600 Series - Page 228

224
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter Show Commands
show ip igmp snooping explicit-tracking
show ip igmp snooping explicit-tracking
To display information about explicit tracking for IGMP snooping, use the show ip igmp snooping
explicit-tracking command.
show ip igmp snooping explicit-tracking [vlan vlan-id]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines When you use this command without the optional vlan argument, the system displays information for
all VLANs.
This command does not require a license.
Examples This example shows how to display information about explicit tracking for IGMP snooping for VLAN
33:
switch# show ip igmp snooping explicit-tracking vlan 33
Related Commands
vlan vlan-id (Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093.
Release Modification
6.0(2)N1(1) This command was introduced.
4.2(2) This command was changed to make the vlan argument optional.
Command Description
clear ip igmp snooping
explicit-tracking vlan
Clears the IGMP snooping explicit host tracking information for VLANs.
ip igmp snooping
explicit-tracking
Enables tracking of IGMPv3 membership reports from individual hosts for
each port on a VLAN.