Cisco Nexus 5600 Series - Page 242

238
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter C Commands
clear ip msdp statistics
clear ip msdp statistics
To clear statistics for Multicast Source Discovery Protocol (MSDP) peers, use the clear ip msdp
statistics command.
clear ip msdp statistics [peer-address] [vrf vrf-name | default | management]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to clear MSDP statistics for all MSDP peers:
switch# clear ip msdp statistics
switch#
Related Commands
peer-address (Optional) IP address of the MSDP peer.
vrf (Optional) Clears the virtual routing and forwarding (VRF) instance information.
vrf-name VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
default (Optional) Specifies that the default VRF entry be cleared from the multicast routing
table.
management (Optional) Specifies that the management VRF entry be cleared from the multicast
routing table.
Release Modification
6.0(2)N1(1) This command was introduced.
Command Description
show ip msdp peer Displays information about MSDP peers.