Cisco Nexus 5600 Series - feature msdp

240
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter F Commands
feature msdp
feature msdp
To enable Multicast Source Discovery Protocol (MSDP), use the feature msdp command. To disable
PIM, use the no form of this command.
feature msdp
no feature msdp
Syntax Description This command has no arguments or keywords.
Command Default Disabled
Command Modes Global configuration mode
Supported User Roles network-admin
VDC administrator
Command History
Usage Guidelines You must enable the MSDP feature before you can configure MSDP.
This command requires the LAN Base Services license.
Examples This example shows how to enable a MSDP configuration:
switch(config)# feature msdp
switch(config#
Related Commands
Release Modified
6.0(2)N1(1) This command was introduced.
Command Description
show
running-configuration
msdp
Displays the MSDP running configuration information.
show feature Displays the status of features on a switch.
ip msdp peer Configures a MSDP peer.