Cisco Nexus 5600 Series - Page 263

259
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter I Commands
ip msdp shutdown
ip msdp shutdown
To shut down a Multicast Source Discovery Protocol (MSDP) peer, use the ip msdp shutdown
command. To enable the peer, use the no form of this command.
ip msdp shutdown peer-address
no ip msdp shutdown peer-address
Syntax Description
Command Default Enabled
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to disable an MSDP peer:
switch(config)# ip msdp shutdown 192.168.1.10
This example shows how to enable an MSDP peer:
switch(config)# no ip msdp shutdown 192.168.1.10
Related Commands
peer-address IP address of an MSDP peer.
Release Modification
6.0(2)N1(1) This command was introduced.
Command Description
show ip msdp peer Displays information about MSDP peers.