Cisco Nexus 5600 Series - restart msdp

262
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter R Commands
restart msdp
restart msdp
To restart the Multicast Source Discovery Protocol (MSDP) process, use the restart msdp command.
restart msdp
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to restart the MSDP process:
switch(config)# restart msdp
Related Commands
Release Modification
6.0(2)N1(1) This command was introduced.
Command Description
ip msdp flush-routes Enables flushing routes when the MSDP process is restarted.