Cisco Nexus 5600 Series - Page 294

290
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter C Commands
clear ip pim statistics
clear ip pim statistics
To clear Protocol Independent Multicast (PIM) statistics counters, use the clear ip pim statistics
command.
clear ip pim statistics [vrf {vrf-name | all | default | management}]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to clear PIM statistics counters:
switch# clear ip pim statistics
switch#
Related Commands
vrf (Optional) Clears the virtual routing and forwarding (VRF) instance information.
vrf-name VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all Specifies that all VRF entries be cleared from the multicast routing table.
default Specifies that the default VRF entry be cleared from the multicast routing table.
management Specifies that the management VRF entry be cleared from the multicast routing table.
Release Modification
6.0(2)N1(1) This command was introduced.
Command Description
show ip pim statistics Displays PIM statistics.