Cisco Nexus 5600 Series - H Commands

303
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter C Commands
clear ipv6 routing multicast event-history
clear ipv6 routing multicast event-history
To clear information in the IPv6 Multicast Routing Information Base (M6RIB) event history buffers, use
the clear ipv6 routing multicast event-history command.
clear ipv6 routing multicast event-history {cli | mfdm | mfdm-stats | rib | vrf}
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to clear information in the M6RIB RIB event history buffer:
switch(config)# clear ipv6 routing multicast event-history rib
switch(config)#
Related Commands
cli Clears the CLI event history buffer.
mfdm Clears the multicast FIB distribution (MFDM event history buffer.
mfdm-stats Clears the MFDM sum event history buffer.
rib Clears the RIB event history buffer.
vrf Clears the virtual routing and forwarding (VRF) event history buffer.
Release Modification
4.1(2) This command was introduced.
Command Description
ipv6 routing multicast
event-history
Configures the size of the IPv6 M6RIB event history buffers.
show routing ipv6
multicast
event-history
Displays information in the IPv6 M6RIB event history buffers.