Cisco Nexus 5600 Series - Page 319

315
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter I Commands
ip pim auto-rp mapping-agent
switch(config)# ip pim auto-rp mapping-agent ethernet 2/1
This example shows how to remove the Auto-RP mapping agent configuration:
switch(config)# no ip pim auto-rp mapping-agent ethernet 2/1
Related Commands Command Description
ip pim border Configures a router to be on the edge of a PIM domain.
ip pim
send-rp-discovery
Configures a router as an Auto-RP mapping agent.
show ip pim rp Displays information about PIM RPs.