Cisco Nexus 5600 Series - Page 427

423
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter Show Commands
show ip pim neighbor
Examples This example shows how to display information about PIM neighbors:
switch(config)# show ip pim neighbor
PIM Neighbor Status for VRF "default"
Neighbor Interface Uptime Expires DR Bidir- BFD
Priority Capable State
192.0.2.2 port-channel2000 03:43:40 00:01:21 1 no n/a
192.0.2.9 port-channel2001 03:43:41 00:01:35 1 no n/a
192.0.2.1 Ethernet1/26 03:43:44 00:01:33 1 no n/a
192.0.2.2 Ethernet2/5 03:43:45 00:01:34 1 no n/a
192.0.2.3 Ethernet2/6 03:43:45 00:01:19 1 no n/a
192.0.2.4 Ethernet2/7 03:43:45 00:01:39 1 no n/a
192.0.2.5 Ethernet3/11 03:43:46 00:01:35 1 no n/a
192.0.2.6 Ethernet3/12 03:43:46 00:01:34 1 no n/a
switch(config)#