Cisco Nexus 5600 Series - Page 59

Show Commands
show ip msdp peer
MCR-55
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show ip msdp peer
To display information about Multicast Source Discovery Protocol (MSDP) peers, use the show ip msdp
peer command.
show ip msdp peer [peer-address] [vrf {vrf-name | all}]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to display information about MSDP peers:
switch(config)# show ip msdp peer
peer-address (Optional) IP address of an MSDP peer.
vrf (Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all Specifies all VRFs.
Release Modification
5.0(3)N1(1) This command was introduced.