Cisco Nexus 5600 Series - Page 99

Show Commands
show ipv6 mld local-groups
MCR-95
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show ipv6 mld local-groups
To display information about the local group membership for Multicast Listener Discovery (MLD), use
the show ipv6 mld local-groups command.
show ipv6 [icmp] mld local-groups [if-type if-number] [vrf {vrf-name | all}]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the Enterprise Services license.
Examples This example shows how to display information about MLD local groups:
switch(config)# show ipv6 mld local-groups
MLD Locally Joined Group Membership for VRF "default"
Group Type Interface Last Reported
(*, ff13::0001)
Local Eth2/1 00:00:55
(*, ff13::0002)
Local Eth2/1 00:00:46
(*, ff13::0003)
icmp (Optional) Specifies ICMPv6 commands.
if-type (Optional) Interface type. For more information, use the question mark (?) online
help function.
if-number (Optional) Interface or subinterface number. For more information about the
numbering syntax for your networking device, use the question mark (?) online help
function.
vrf (Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all Specifies all VRFs.
Release Modification
5.0(3)N1(1) This command was introduced.