Cisco PIX 501

11
Refer to the following website for detailed command information and configuration examples:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/index.htm
The Cisco TAC website is available to all customers who need technical assistance. To access the TAC
website, go to:
http://www.cisco.com/tac
Alternative Ways to Access the PIX 501
You can access the CLI for administration using the console port on the PIX Firewall. To do so, you
must run a serial terminal emulator on a PC or workstation.
Follow these steps to connect a console for local administrative access:
Step 1 Plug one end of the PC terminal adapter (74-0495-01) into a standard 9-pin PC serial port.
Step 2 Plug one end of the blue console cable (72-1259-01) into the PC terminal adapter.
Step 3 Plug the other end of the blue console cable into the Console port.
Step 4 Configure the PC terminal emulation software or terminal for 9600 baud, 8 data bits, no
parity, and 1 stop bit.
61391
P
O
W
E
R
4
3
2
1
0
CONSOLE
3
.3
V
4
.5
A
PC terminal adapter
(74-0495-01)
Blue console cable
Cisco PIX 501