Cisco Precision 40 User Manual

Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 9
Camera guide
PrecisionHD Camera 1080p2.5x
Only available as a part of the Cisco TelePresence SX20 Quick
Set.
Spare PID: CTS-PHD-2.5X=
The camera can be mounted on a screen with the camera
bracket that is part of the SX20 Quick Set bundle, or it can
stand on an even surface. The image flips automatically.
HDMI and camera control
Video out
• HDMI is the video out source.
• The maximum resolution is 1080p60.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Power
For future use.
USB
For future use.
The LED is lit during a call.
The LED is continuously lit when the
system is in use. It flickers when the
system receives signals from the remote
control and blinks when rebooting. The
LED pulsates when the system is in
Standby mode.
USB
HDMI Video out,
camera control and
power
Power supply
Pulsating –——– ——– ——–
Blinking — — — — — — — —
Flickering •••••••••••••••••••••••••
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Physical Interface

Cisco Precision 40 Specifications

General

Brand	Cisco
Model	Precision 40
Category	IP Camera
Language	English