19
Prole Series, Codec C Series and Quick Set C20 / C20 Plus Getting started guide
D14639.03 Prole Series, Codec C Series and Quick Set C20/C20 Plus Getting Started Guide TC4.1, Feb 2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Signing in
The web interface
The web interface allows for remote administration of the
system.
Connect to the codec
Open a web browser and enter the IP address of the
codec.
How to nd the IP address:
To nd the IP address, open the System Information page
using the remote control. Navigate to Home > Settings >
System Information.
Password protection of the web interface
In order to access the web interface you must sign in. The
username and password are the same as dened for the
codec. The default username is admin with no password
set.
Read more about password protecting your codec in the
Password protection chapter.
1. Enter the IP address
of the codec.
2. Enter the username
and password and
press Sign In.