Cisco RV110W Datasheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 6
Product Specifications
Table 1 gives the product specifications for the Cisco RV110W.
Table 1. Product Specifications
Feature Description
Routing
●
Static routing
●
Dynamic routingRouting Information Protocol (RIP) v1 and v2
●
Inter-VLAN routing
Layer 2
●
802.1Q -based VLANs
●
4 active VLANs (3 to 4094 range)
Network
●
Dynamic Host Configuration Protocol (DHCP) server
●
Point-to-Point Protocol over Ethernet (PPPoE)
●
Point-to-Point Tunneling Protocol (PPTP)
●
Layer 2 Tunneling Protocol (L2TP)
●
DNS proxy
●
DHCP relay agent
●
Internet Group Management Protocol (IGMP) proxy and multicast forwarding
●
Rapid Spanning Tree Protocol (RSTP)
●
Dynamic DNS (DDNS), TZO.com, DynDNS.com, 3322.org
●
Network Address Translation (NAT), Port Address Translation (PAT)
●
Port management
●
Port Mirroring
●
Software-configurable network edge (DMZ) to any LAN IP address
IPv6
●
Dual-stack IPv4 and IPv6
●
6to4 tunneling
●
Multicast Listener Discovery (MLD) for IPv6 (RFC 2710)
●
Stateless address auto-configuration
●
DHCP v6 Server for IPv6 Clients on LAN
●
DHCP v6 client for WAN connectivity
●
Internet Control Message Protocol (ICMP) v6
●
Static IPv6 Routing
●
Dynamic IPv6 Routing with RIPng
Security
●
Stateful packet inspection (SPI) firewall
●
Port forwarding and triggering
●
Firewall Access Control Lists and Content Filtering
●
Denial-of-service (DoS) prevention
●
MAC-based wireless access control
●
Static URL blocking or keyword blocking
●
Schedule-based Internet access policy
●
HTTPS web access to the device manager
●
username/password complexity enforcement
●
Self-signed SSL certificate
●
Import and export certificate using Privacy-Enhanced Mail (PEM) format
VPN
●
5 IPsec tunnels using Cisco QuickVPN client
●
5 PPTP tunnels for remote client access
●
Triple Data Encryption Standard (3DES) VPN pass-through of PPTP, L2TP, and IPsec
Quality of service (QoS)
●
802.1p port-based priority on LAN port, application-based priority on WAN port
●
4 queues
●
Differentiated Services Code Pointsupport (DSCP)
●
Class of Service (CoS)
●
Bandwidth Management for service prioritization

Cisco RV110W Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity	10
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity	13 channels
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports	4
Input voltage	12 V
Rack mounting	No
Number of users	32 user(s)
Weight (imperial)	0.61 lbs
Dimensions (WxDxH)	150 x 150 x 30 mm
Operating temperature (T-T)	32 - 104 °F
Compliance industry standards	IEEE 802.3, IEEE 802.3u
Supported data transfer rates	10/100Mbps
Dimensions (W x D x H) (imperial)	5.91 x 5.91 x 1.18 \
WLAN data transfer rates supported	11, 54 Mbit/s
Supported network protocols	PPPoE, DHCP, PPTP, L2TP, IGMP, RSTP
Antennas quantity	2
Antenna gain level (max)	1.8 dBi
Firewall security	VPN
Security algorithms	WEP, WPA, WPA2, WPS
MAC address filtering	-
Product color	Black
Certification	FCC, CE, IC, cUL, Wi-Fi
Storage temperature (T-T)	-20 - 70 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Width	150 mm
Height	30 mm
Weight	300 g