EasyManuals Logo
Home>Cisco>Firewall>RV110W

Cisco RV110W Datasheet

Cisco RV110W
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 6
Feature Description
Management
Simple Network Management Protocol (SNMP) v3
Event logging: local, syslog, email alerts
Firmware upgradable through web browser
Imported/exported configuration in text format
Simple browser-based configuration (HTTP/HTTPS)
Bonjour and Universal Plug and Play (UPnP)
Network diagnostics: Ping, Traceroute, and DNS Lookup
Performance
NAT throughput: 90 Mbps
5000 concurrent sessions
VPN throughput: 5Mbps
Wireless LAN Specifications
Table 2 gives the wireless specifications for the Cisco RV110W.
Table 2. Wireless LAN Specifications
Features Description
WLAN hardware
IEEE 802.11n standard-based access point with 802.11b/g compatibility
Radio and modulation type:
802.11b: direct sequence spread spectrum (DSSS)
802.11g/n: orthogonal frequency division multiplexing (OFDM)
2 omnidirectional 1.8 dBi gain fixed external antennas
Operating channels:
11 in North America
13 in most of Europe
Automatic channel selection
Transmit power:
802.11b: 17 dBm +/- 1.5 dBm
802.11g: 15 dBm +/- 1.5 dBm
802.11n: 12.5 dBm +/- 1.5 dBm
Receiver sensitivity:
-87 dBm at 11 Mbps
-71 dBm at 54 Mbps
-68 dBm at msc15, HT20 / -66dBm at mcs15, HT40
Wireless Domain Services
(WDS)
Allows wireless signals to be repeated by up to 3 compatible devices
Wi-Fi Multimedia (WMM)
WMM with QoS (802.11e), WMM power save (WMM-PS)
Active WLAN clients
Up to 32 clients
Service Set Identifiers (SSIDs)
Up to 4 separate wireless networks
Wireless isolation
Wireless isolation between clients
WLAN security
Wireless isolation between clients
WPS ( Wi-Fi Protected Setup), Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA) personal
and enterprise, WPA2 personal and enterprise

Other manuals for Cisco RV110W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV110W and is the answer not in the manual?

Cisco RV110W Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity10
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity13 channels
Top Wi-Fi standardWi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports4
Input voltage12 V
Rack mountingNo
Number of users32 user(s)
Weight (imperial)0.61 lbs
Dimensions (WxDxH)150 x 150 x 30 mm
Operating temperature (T-T)32 - 104 °F
Compliance industry standardsIEEE 802.3, IEEE 802.3u
Supported data transfer rates10/100Mbps
Dimensions (W x D x H) (imperial)5.91 x 5.91 x 1.18 \
WLAN data transfer rates supported11, 54 Mbit/s
Supported network protocolsPPPoE, DHCP, PPTP, L2TP, IGMP, RSTP
Antennas quantity2
Antenna gain level (max)1.8 dBi
Firewall securityVPN
Security algorithmsWEP, WPA, WPA2, WPS
MAC address filtering-
Product colorBlack
CertificationFCC, CE, IC, cUL, Wi-Fi
Storage temperature (T-T)-20 - 70 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Width150 mm
Height30 mm
Weight300 g

Related product manuals