Need help?Do you have a question about the Cisco SD208 and is the answer not in the manual?
General| Switching Capacity | 1.6 Gbps |
|---|---|
| Forwarding Rate | 1.19 Mpps |
| Jumbo Frame Support | No |
| Ports | 8 Ethernet 10/100 ports |
| Weight | 0.5 kg |
The LEDs are located on the front panel of the Switch, indicating system status and port activity.
The power port is located on one side, and a security slot is on the opposite side of the Switch.
The Ethernet network ports are located on the back panel of the Switch for connecting devices.
The Switch can be placed on its rubber feet or mounted on a wall using specific instructions.
Use only the supplied power adapter; using a different one may damage the Switch.
To Next Page
