Cisco SD2008

Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 3
Cisco SD2008 8-Port 10/100/1000 Gigabit Switch
Cisco Small Business Unmanaged Switches
Wire-Speed Switching and Cisco Reliability in an 8-Port Gigabit Switch
Highlights
●
Connect up to eight network devices - PCs, printers, and servers - to share and transfer files
and videos across your network
●
High-speed conectivity to support bandwidth-intensive applications
●
Works right out of the box with no software to configure
●
Compact size provides multiple placement option for areas with limited space
Figure 1. Cisco SD2008 8-Port 10/100/1000 Gigabit Switch
Product Overview
The Cisco
®
SD2008 8-Port 10/100/1000 Gigabit Switch (Figure 1) provides nonblocking, wire-
speed switching for your 10-, 100-, and 1000 megabit (Mb) network clients. Use this switch to
replace your current workgroup hub or switch, and you can upgrade your high-requirement
workstations to full Gigabit speeds as necessary, while continuing to service other clients at their
current speeds. Or build your network from the ground up, with appropriate link speeds for each
user’s requirements. Either way, it’s perfect for graphics, multimedia, and other applications that
have to move large files across the network quickly.
With the Cisco SD2008, you can connect your existing 10/100 Ethernet network to a Gigabit server
backbone without any additional equipment. All ports have automatic medium dependent interface
(MDI) and MDI crossover (MDI-X) cable detection, so you don’t have to worry about the cable type.
Each port independently and automatically negotiates for best speed and determines whether to
run in half- or full-duplex mode. Address Learning and Aging are supported, as well as 802.3x flow
control with head-of-line blocking prevention to keep your high-speed clients from bogging down in
lower-speed traffic. Fast store-and-forward switching prevents damaged packets from being
passed on to the network.

Cisco SD2008 Specifications

General

Device Type	Unmanaged Switch
Number of Ports	8
Layer	Layer 2
Power over Ethernet (PoE)	No
Switching Capacity	16 Gbps
Forwarding Rate	11.9 Mpps
MAC Address Table Size	8000 entries
Jumbo Frame Support	Yes
Port Type	10/100/1000 Mbps Ethernet

Summary

Product Overview and Highlights

Product Overview

Provides nonblocking, wire-speed switching for 10-, 100-, and 1000-Mbps network clients, upgrading existing networks.

Key Highlights

Connect up to eight devices, high-speed connectivity, plug-and-play, and compact size for limited spaces.

Features and Specifications

Key Features

Eight auto-sensing RJ-45 ports, auto MDI/MDI-X, IEEE compliance, non-blocking architecture, and flow control.

Technical Specifications

Details standards, ports, cabling, LEDs, security, dimensions, weight, power, certification, and environmental conditions.

Package Contents

Includes the Cisco SD2008 switch, AC power adapter, and user guide.

Warranty and Further Information

Product Warranty

Offers a limited lifetime hardware warranty with 1-year for fans and power supplies, plus software updates.

Additional Information

Links to warranty terms, product solutions, and office locations worldwide.