Need help?Do you have a question about the Cisco SF220-24 and is the answer not in the manual?
General| Model | SF220-24 |
|---|---|
| Layer | Layer 2 |
| Jumbo Frame Support | Yes |
| Quality of Service (QoS) | Yes |
| VLAN Support | Yes |
| Power over Ethernet (PoE) | No |
| Power Supply | Internal |
| Relative Humidity | 10% to 90% non-condensing |
| Uplink Ports | 2 x combo Gigabit SFP |
| MAC Address Table Size | 8K entries |
| Management | Web-based GUI |
| Weight | 5.5 lbs |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Storage Temperature | -40 to 158°F (-40 to 70°C) |
| Ports | 24 10/100 Ethernet ports |
Lists the available Cisco 220 Series switch models and their port configurations.
Details the ports, LEDs, and reset button located on the front of the switch.
Describes the power and console ports found on the back of the switch.
Provides essential tips for switch placement, including ambient temperature and airflow.
Details the procedure for mounting the switch securely in a standard 19-inch rack.
Explains the steps and hardware needed to mount the non-PoE switch on a wall.
Details important considerations for using Power over Ethernet with compatible switch models.
Guides users through accessing and configuring the switch via its web interface.
Details the process of configuring the switch using the console port and terminal utility.
Provides steps to test network connectivity and diagnose connection issues using ping.
Lists common problems and their suggested solutions for connectivity issues.
To Next Page
