Need help?Do you have a question about the Cisco SF302-08MPP and is the answer not in the manual?
General| Device Type | Managed Switch |
|---|---|
| Number of Ports | 8 |
| Layer | Layer 2 |
| Power over Ethernet (PoE) | Yes |
| Jumbo Frame Support | 9216 bytes |
| Power Supply | Internal |
| Port Type | 10/100 Mbps |
| Uplink Ports | 2 x Gigabit SFP |
| MAC Address Table Size | 8K entries |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Operating Humidity | 10 to 90% relative humidity, noncondensing |
| Storage Humidity | 5% to 95% (non-condensing) |
| Dimensions (W x D x H) | 280 x 170 x 44 mm (11.02 x 6.69 x 1.73 in) |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
Conditions to avoid when deploying the switch, including high ambient temperature, reduced air flow, and overloading.
Step-by-step instructions for attaching rack-mount brackets to the switch for installation in a 19-inch rack.
Procedure for wall-mounting only the 8-port Cisco 300 Series Managed Switches, including pilot hole placement.
Steps to connect network devices using Ethernet cables, including recommendations for cable type and distance limits.
Information on Power over Ethernet (PoE) capabilities, supported standards, and potential issues with PSE devices.
Methods for accessing and managing the switch via web-based interface or console port, including initial setup steps.
Detailed steps to access the switch using its IP address in a web browser, including login and initial configuration.
Instructions for configuring the switch using a console port connection with a terminal emulation program.
Guidance on diagnosing and resolving connection problems, including ping tests and common causes like bad connections or IP addresses.
Description of front panel ports (RJ-45 Ethernet, SFP) and status LEDs, explaining their functions and indicators.
Details on the reset button for rebooting and restoring factory defaults, and description of back panel ports (Power, Console).
Instructions on how to use the reset button to either reboot the switch or restore its configuration to factory defaults.
Links to various Cisco support channels, including communities, resources, and contact information for assistance.
References to additional product documentation, regulatory information, and warranty details for the Cisco 300 Series Managed Switches.
To Next Page
