Need help?Do you have a question about the Cisco SF302-08PP and is the answer not in the manual?
General| Product Type | Managed Switch |
|---|---|
| Number of Ports | 8 |
| Port Type | 10/100 Mbps Ethernet |
| Power over Ethernet (PoE) | Yes |
| Layer | Layer 2 |
| Form Factor | Desktop |
| Jumbo Frame Support | Yes |
| Power Supply | Internal |
| Management Type | Web-based |
| MAC Address Table Size | 8K entries |
| VLANs | 256 |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Operating Humidity | 10% to 90% (non-condensing) |
| Storage Humidity | 5% to 95% (non-condensing) |
Lists all items included in the switch package for setup.
Describes the three physical methods for installing the switch.
Details environmental conditions to avoid and physical installation precautions for the switch.
Step-by-step instructions for attaching rack-mount brackets to the switch.
Instructions for mounting the 8-port switch models on a wall.
Guides on how to connect computers, printers, and storage devices to the switch.
Details on Power over Ethernet capabilities, models, and standards supported.
Explains how to access and manage the switch via web interface or console port.
Steps to access and log in to the switch using its web-based management interface.
Steps to connect and configure the switch using a serial console port.
Provides methods to diagnose and resolve network connectivity problems with the switch.
Description of the RJ-45 Ethernet and SFP ports on the switch's front panel.
Explanation of the status lights (LEDs) for system, link, PoE, speed, and SFP.
Details on the reset button function and the location of power and console ports on the back.
Instructions on how to reboot or restore the switch to its original factory default configuration.
Links to Cisco support communities, documentation, and contact information.
To Next Page
