Cisco SG 300-10 User Manual

9 300 Series Managed Switches
No IP route:
If the switch and your computer are in different IP subnets, you need
one or more routers to route the packets between the two subnets.
Unusually long access time:
Due to the standard spanning tree loop detection logic, adding new
connections may take 30 to 60 seconds for the affected interfaces
and/or LAN to become operational.

Cisco SG 300-10 Specifications

General

Model	SG 300-10
Ports	10
Port Type	Gigabit Ethernet
Form Factor	Desktop
Layer	Layer 3
PoE	No
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
Power Supply	Internal
Management	Managed
MAC Address Table Size	8000 entries
VLANs	256
Quality of Service (QoS)	Supported
Security Features	802.1X
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90%, non-condensing
Jumbo Frame Support	Yes (up to 9216 bytes)
Dimensions (W x D x H)	279.4 x 170.18 x 44.45 mm