Administration: Discovery
Discover - LLDP
144 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
9
STEP 3 Select a local port, and click Details.
The LLDP Neighbor Information page contains the following fields:
Port Details
• Local Port—Port number.
• MSAP Entry—Device Media Service Access Point (MSAP) entry number.
Basic Details
• Chassis ID Subtype—Type of chassis ID (for example, MAC address).
• Chassis ID—Identifier of the 802 LAN neighboring device chassis.
• Port ID Subtype—Type of the port identifier that is shown.
• Port ID—Identifier of port.
• Port Description—Information about the port, including manufacturer, product name
and hardware/software version.
• System Name—Name of system that is published.
• System Description—Description of the network entity (in alpha-numeric format).
This includes the system name and versions of the hardware, operating system, and
networking software supported by the device. The value equals the sysDescr object.
• Supported System Capabilities—Primary functions of the device. The capabilities are
indicated by two octets. Bits 0 through 7 indicate Other, Repeater, Bridge, WLAN AP,
Router, Telephone, DOCSIS cable device, and station, respectively. Bits 8 through 15
are reserved.
• Enabled System Capabilities—Primary enabled function(s) of the device.
Management Address Table
• Address Subtype—Managed address subtype; for example, MAC or IPv4.
• Address—Managed address.
• Interface Subtype—Port subtype.
• Interface Number—Port number.
MAC/PHY Details
• Auto-Negotiation Supported—Port speed auto-negotiation support status. The
possible values are True and False.
To Next Page
Loading...
