Need help?Do you have a question about the Cisco SG350-10P and is the answer not in the manual?
General| Product Name | Cisco SG350-10P |
|---|---|
| Category | Switch |
| Ports | 10 |
| PoE Ports | 8 |
| PoE Power Budget | 62W |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| Layer | Layer 3 |
| Power Supply | Internal |
| Relative Humidity | 10% to 90% non-condensing |
| MAC Address Table Size | 8K |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 70°C |
| Operating Altitude | Up to 3, 000 meters |
Step-by-step guide to access and configure the switch via its web interface.
Instructions for configuring the switch using a console port and terminal emulation.
Steps to test and diagnose network connectivity issues with the switch.
Common issues like no power or connection problems and their solutions.
Troubleshooting steps specific to IP address assignment and network access.
To Next Page
