Need help?Do you have a question about the Cisco SG350-10MP and is the answer not in the manual?
General| Model | SG350-10MP |
|---|---|
| Category | Switch |
| PoE Budget | 130W |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| Power Supply | Internal |
| Ports | 8 x 10/100/1000 PoE+ + 2 x Gigabit SFP |
| MAC Address Table Size | 16K |
| Jumbo Frame Support | 9216 bytes |
| Management | Web-based, CLI, SNMP |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Operating Humidity | 10% to 90% relative humidity, non-condensing |
| Storage Humidity | 5% to 95% relative humidity, non-condensing |
| Dimensions (W x D x H) | 279.4 x 170 x 44 mm (11.0 x 6.7 x 1.73 in) |
Lists items included in the switch package.
Pre-installation checks and requirements for setting up the switch.
Guidelines for optimal switch placement to avoid overheating or instability.
Instructions for installing the switch into a standard 19-inch rack.
Step-by-step guide for securely mounting the switch to a wall.
Steps for connecting devices to the switch and cable requirements.
Information on Power over Ethernet capabilities and model-specific power requirements.
Details default username, password, and IP address for initial switch setup.
Step-by-step guide to configure the switch via its web-based graphical interface.
Instructions for setting up and using the command-line interface via a console connection.
A comprehensive list of available Cisco 350 Series switch models and their descriptions.
Overview of the switch's front panel, including ports and LEDs.
Explanation of the status and function of each LED indicator on the front panel.
Information on how to use the reset button for rebooting or restoring factory defaults.
Details on the back panel components, including power and console ports.
Procedure for resetting the switch to its original factory default configuration.
Steps to test network reachability to the switch using the ping command.
Identifies common problems and their potential solutions for connectivity or power issues.
Provides links to Cisco support communities, resources, product documentation, and firmware downloads.
To Next Page
