Need help?Do you have a question about the Cisco SG350-28P and is the answer not in the manual?
General| Model | SG350-28P |
|---|---|
| Category | Switch |
| Ports | 28 |
| PoE Ports | 24 |
| PoE Budget | 195W |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.67 Mpps |
| Layer | Layer 3 |
| Rack Mountable | Yes |
| Gigabit Ethernet Ports | 28 |
| MAC Address Table Size | 16K |
| Power Supply | Internal |
| Jumbo Frame Support | Yes |
| Dimensions (W x D x H) | 440 x 257 x 44 mm |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
Instructions for securely mounting the switch in a standard 19-inch rack.
Steps for safely mounting the Cisco switch onto a wall surface.
Step-by-step guide to accessing and configuring the switch via its web interface.
Procedure for configuring the switch through the command-line interface via a console port.
Lists common connection issues and provides potential solutions.
To Next Page
