Cisco SPA1112 Administration Guide

Configuring the Voice Settings
Line1 and Line 2 Settings (PHONE Port1 and PHONE2)
Cisco SPA100Series Administration Guide 93
4
Field Description
Call Waiting Serv Enable Call Waiting Service.
Default setting: yes
Block CID Serv Enable Block Caller ID Service.
Default setting: yes
Block ANC Serv Enable Block Anonymous Calls Service
Default setting: yes
Dist Ring Serv Enable Distinctive Ringing Service
Default setting: yes
Cfwd All Serv Enable Call Forward All Service
Default setting: yes
Cfwd Busy Serv Enable Call Forward Busy Service
Default setting: yes
Cfwd No Ans Serv Enable Call Forward No Answer Service
Default setting: yes
Cfwd Sel Serv Enable Call Forward Selective Service. Configure this
service in the Selective Call Forward Settings section.
Default setting: yes
Cfwd Last Serv Enable Forward Last Call Service
Default setting: yes
Block Last Serv Enable Block Last Call Service
Default setting: yes
Accept Last Serv Enable Accept Last Call Service
Default setting: yes
DND Serv Enable Do Not Disturb Service
Default setting: yes
CID–Serv Enable Caller ID Service
Default setting: yes
CWCID Serv Enable Call Waiting Caller ID Service
Default setting: yes
Call Return Serv Enable Call Return Service
Default setting: yes

Cisco SPA1112 Specifications

General

Brand	Cisco
Model	SPA1112
Category	Adapter
Language	English