Cisco SPA122 Setup Guide

Cisco SPA112 \ Cisco SPA122
1. Setup occurs in the web interface. To log into it, enter the gateway IP address in your
browser’s address bar. You can find the gateway IP address by connecting a phone to it
and dialing ****110#. The default username and password are both admin.
2. Open Voip>SIP and enter the following RTP port range:
RTP Port Min: 1024
RTP Port Max: 65455

Cisco SPA122 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Mbps Ethernet
Voice Protocol	SIP
Voice Codecs	G.711, G.726, G.729 A
Security	TLS
Power Supply	5V DC, 2A
Network Ports	1 x 10/100 Mbps
Fax Support	T.38 fax relay
Operating Temperature	0°C to 45°C
Storage Temperature	14 to 140°F (-10 to 60°C)
Humidity	10% to 90% noncondensing
Weight	0.16 kg