Cisco SPA8800 Configuring

Configuring the Cisco SPA8800 IP Telephony Gateway in an Asterisk Environment
© 2009 Cisco Systems, Inc. All rights reserved. Page 40 of 69
Method: REGISTER
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Supported: replaces
WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="1fc67977"
Authentication Scheme: Digest
Algorithm: MD5
Realm: "asterisk"
Nonce Value: "1fc67977"
Content-Length: 0
Frame 66 (699 bytes on wire, 699 bytes captured)
Ethernet II, Src: 00:24:97:f0:50:3c (00:24:97:f0:50:3c), Dst: Internet_1c:33:a1
(00:e0:4d:1c:33:a1)
Internet Protocol, Src: 192.168.2.237 (192.168.2.237), Dst: 192.168.2.20 (192.168.2.20)
User Datagram Protocol, Src Port: 5160 (5160), Dst Port: sip (5060)
Session Initiation Protocol
Request-Line: REGISTER sip:192.168.2.20 SIP/2.0
Method: REGISTER
[Resent Packet: False]
Message Header
Via: SIP/2.0/UDP 192.168.2.237:5160;branch=z9hG4bK-edebcc26
Transport: UDP
Sent-by Address: 192.168.2.237
Sent-by port: 5160
Branch: z9hG4bK-edebcc26
From: "SPA8k8Phone2" <sip:102@192.168.2.20>;tag=a29b792271423dfeo0
SIP Display info: "SPA8k8Phone2"
SIP from address: sip:102@192.168.2.20
SIP tag: a29b792271423dfeo0
To: "SPA8k8Phone2" <sip:102@192.168.2.20>
SIP Display info: "SPA8k8Phone2"
SIP to address: sip:102@192.168.2.20
Call-ID: b628f5b9-f2e991a6@127.0.0.1
CSeq: 24223 REGISTER
Sequence Number: 24223
Method: REGISTER
Max-Forwards: 70
Authorization: Digest
username="102",realm="asterisk",nonce="1fc67977",uri="sip:192.168.2.20",algorithm=MD5,response
="1cbd8f1d81e70d514f0e494681eea440"
Authentication Scheme: Digest
Username: "102"
Realm: "asterisk"
Nonce Value: "1fc67977"
Authentication URI: "sip:192.168.2.20"
Algorithm: MD5
Digest Authentication Response: "1cbd8f1d81e70d514f0e494681eea440"
Contact: "SPA8k8Phone2" <sip:102@192.168.2.237:5160>;expires=3600
Contact Binding: "SPA8k8Phone2" <sip:102@192.168.2.237:5160>;expires=3600
URI: "SPA8k8Phone2" <sip:102@192.168.2.237:5160>
SIP Display info: "SPA8k8Phone2"
SIP contact address: sip:102@192.168.2.237:5160
User-Agent: Cisco/SPA8800-6.1.7(GW)
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura, replaces
Frame 67 (486 bytes on wire, 486 bytes captured)
Ethernet II, Src: Internet_1c:33:a1 (00:e0:4d:1c:33:a1), Dst: 00:24:97:f0:50:3c
(00:24:97:f0:50:3c)
Internet Protocol, Src: 192.168.2.20 (192.168.2.20), Dst: 192.168.2.237 (192.168.2.237)
User Datagram Protocol, Src Port: sip (5060), Dst Port: 5160 (5160)
Session Initiation Protocol
Status-Line: SIP/2.0 100 Trying
Status-Code: 100
[Resent Packet: False]
Message Header
Via: SIP/2.0/UDP 192.168.2.237:5160;branch=z9hG4bK-edebcc26;received=192.168.2.237
Transport: UDP
Sent-by Address: 192.168.2.237
Sent-by port: 5160
Branch: z9hG4bK-edebcc26
Received: 192.168.2.237
From: "SPA8k8Phone2" <sip:102@192.168.2.20>;tag=a29b792271423dfeo0
SIP Display info: "SPA8k8Phone2"
SIP from address: sip:102@192.168.2.20
SIP tag: a29b792271423dfeo0
To: "SPA8k8Phone2" <sip:102@192.168.2.20>
SIP Display info: "SPA8k8Phone2"
SIP to address: sip:102@192.168.2.20
Call-ID: b628f5b9-f2e991a6@127.0.0.1
CSeq: 24223 REGISTER
Sequence Number: 24223
Method: REGISTER

Cisco SPA8800 Specifications

General

Brand	Cisco
Model	SPA8800
Category	Gateway
Language	English