Cisco SPA8800 Configuring

Configuring the Cisco SPA8800 IP Telephony Gateway in an Asterisk Environment
© 2009 Cisco Systems, Inc. All rights reserved. Page 41 of 69
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Supported: replaces
Contact: <sip:102@192.168.2.20>
Contact Binding: <sip:102@192.168.2.20>
URI: <sip:102@192.168.2.20>
SIP contact address: sip:102@192.168.2.20
Content-Length: 0
Frame 68 (568 bytes on wire, 568 bytes captured)
Ethernet II, Src: Internet_1c:33:a1 (00:e0:4d:1c:33:a1), Dst: 00:24:97:f0:50:3c
(00:24:97:f0:50:3c)
Internet Protocol, Src: 192.168.2.20 (192.168.2.20), Dst: 192.168.2.237 (192.168.2.237)
User Datagram Protocol, Src Port: sip (5060), Dst Port: 5160 (5160)
Session Initiation Protocol
Status-Line: SIP/2.0 200 OK
Status-Code: 200
[Resent Packet: False]
Message Header
Via: SIP/2.0/UDP 192.168.2.237:5160;branch=z9hG4bK-edebcc26;received=192.168.2.237
Transport: UDP
Sent-by Address: 192.168.2.237
Sent-by port: 5160
Branch: z9hG4bK-edebcc26
Received: 192.168.2.237
From: "SPA8k8Phone2" <sip:102@192.168.2.20>;tag=a29b792271423dfeo0
SIP Display info: "SPA8k8Phone2"
SIP from address: sip:102@192.168.2.20
SIP tag: a29b792271423dfeo0
To: "SPA8k8Phone2" <sip:102@192.168.2.20>;tag=as674411f6
SIP Display info: "SPA8k8Phone2"
SIP to address: sip:102@192.168.2.20
SIP tag: as674411f6
Call-ID: b628f5b9-f2e991a6@127.0.0.1
CSeq: 24223 REGISTER
Sequence Number: 24223
Method: REGISTER
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Supported: replaces
Expires: 3600
Contact: <sip:102@192.168.2.237:5160>;expires=3600
Contact Binding: <sip:102@192.168.2.237:5160>;expires=3600
URI: <sip:102@192.168.2.237:5160>
SIP contact address: sip:102@192.168.2.237:5160
Date: Fri, 05 Jun 2009 10:02:02 GMT
Content-Length: 0

Cisco SPA8800 Specifications

General

Brand	Cisco
Model	SPA8800
Category	Gateway
Language	English