Cisco SPA8800 Configuring

Configuring the Cisco SPA8800 IP Telephony Gateway in an Asterisk Environment
© 2009 Cisco Systems, Inc. All rights reserved. Page 45 of 69
SIP Display info: "SPA8k8Phone1"
SIP from address: sip:101@192.168.2.20
SIP tag: 377ea678f1613b1o0
To: <sip:102@192.168.2.20>;tag=as4fc6eca0
SIP to address: sip:102@192.168.2.20
SIP tag: as4fc6eca0
Call-ID: c677a744-912e2955@192.168.2.237
CSeq: 102 INVITE
Sequence Number: 102
Method: INVITE
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Supported: replaces
Contact: <sip:102@192.168.2.20>
Contact Binding: <sip:102@192.168.2.20>
URI: <sip:102@192.168.2.20>
SIP contact address: sip:102@192.168.2.20
Content-Length: 0
Frame 84 (343 bytes on wire, 343 bytes captured)
Ethernet II, Src: 00:24:97:f0:50:3c (00:24:97:f0:50:3c), Dst: Internet_1c:33:a1
(00:e0:4d:1c:33:a1)
Internet Protocol, Src: 192.168.2.237 (192.168.2.237), Dst: 192.168.2.20 (192.168.2.20)
User Datagram Protocol, Src Port: 5160 (5160), Dst Port: sip (5060)
Session Initiation Protocol
Status-Line: SIP/2.0 100 Trying
Status-Code: 100
[Resent Packet: False]
Message Header
To: <sip:102@192.168.2.237:5160>
SIP to address: sip:102@192.168.2.237:5160
From: "SPA8k8Phone1" <sip:101@192.168.2.20>;tag=as57eae9e2
SIP Display info: "SPA8k8Phone1"
SIP from address: sip:101@192.168.2.20
SIP tag: as57eae9e2
Call-ID: 3512588b465552ee7ec40bea27c3f72d@192.168.2.20
CSeq: 102 INVITE
Sequence Number: 102
Method: INVITE
Via: SIP/2.0/UDP 192.168.2.20:5060;branch=z9hG4bK05ac3a4e
Transport: UDP
Sent-by Address: 192.168.2.20
Sent-by port: 5060
Branch: z9hG4bK05ac3a4e
Server: Cisco/SPA8800-6.1.7(GW)
Content-Length: 0
Frame 85 (501 bytes on wire, 501 bytes captured)
Ethernet II, Src: 00:24:97:f0:50:3c (00:24:97:f0:50:3c), Dst: Internet_1c:33:a1
(00:e0:4d:1c:33:a1)
Internet Protocol, Src: 192.168.2.237 (192.168.2.237), Dst: 192.168.2.20 (192.168.2.20)
User Datagram Protocol, Src Port: 5160 (5160), Dst Port: sip (5060)
Session Initiation Protocol
Status-Line: SIP/2.0 180 Ringing
Status-Code: 180
[Resent Packet: False]
Message Header
To: <sip:102@192.168.2.237:5160>;tag=cf247750d7f2b62ei0
SIP to address: sip:102@192.168.2.237:5160
SIP tag: cf247750d7f2b62ei0
From: "SPA8k8Phone1" <sip:101@192.168.2.20>;tag=as57eae9e2
SIP Display info: "SPA8k8Phone1"
SIP from address: sip:101@192.168.2.20
SIP tag: as57eae9e2
Call-ID: 3512588b465552ee7ec40bea27c3f72d@192.168.2.20
CSeq: 102 INVITE
Sequence Number: 102
Method: INVITE
Via: SIP/2.0/UDP 192.168.2.20:5060;branch=z9hG4bK05ac3a4e
Transport: UDP
Sent-by Address: 192.168.2.20
Sent-by port: 5060
Branch: z9hG4bK05ac3a4e
Contact: "SPA8k8Phone2" <sip:102@192.168.2.237:5160>
Contact Binding: "SPA8k8Phone2" <sip:102@192.168.2.237:5160>
URI: "SPA8k8Phone2" <sip:102@192.168.2.237:5160>
SIP Display info: "SPA8k8Phone2"
SIP contact address: sip:102@192.168.2.237:5160
Server: Cisco/SPA8800-6.1.7(GW)
Remote-Party-ID: "SPA8k8Phone2" <sip:102@192.168.2.20>;screen=yes;party=called
Content-Length: 0
Frame 86 (874 bytes on wire, 874 bytes captured)
Ethernet II, Src: 00:24:97:f0:50:3c (00:24:97:f0:50:3c), Dst: Internet_1c:33:a1
(00:e0:4d:1c:33:a1)

Cisco SPA8800 Specifications

General

Brand	Cisco
Model	SPA8800
Category	Gateway
Language	English