Cisco SPA8800

Configuring the Cisco SPA8800 IP Telephony Gateway in an Asterisk Environment
© 2009 Cisco Systems, Inc. All rights reserved. Page 46 of 69
Internet Protocol, Src: 192.168.2.237 (192.168.2.237), Dst: 192.168.2.20 (192.168.2.20)
User Datagram Protocol, Src Port: 5160 (5160), Dst Port: sip (5060)
Session Initiation Protocol
Status-Line: SIP/2.0 200 OK
Status-Code: 200
[Resent Packet: False]
Message Header
To: <sip:102@192.168.2.237:5160>;tag=cf247750d7f2b62ei0
SIP to address: sip:102@192.168.2.237:5160
SIP tag: cf247750d7f2b62ei0
From: "SPA8k8Phone1" <sip:101@192.168.2.20>;tag=as57eae9e2
SIP Display info: "SPA8k8Phone1"
SIP from address: sip:101@192.168.2.20
SIP tag: as57eae9e2
Call-ID: 3512588b465552ee7ec40bea27c3f72d@192.168.2.20
CSeq: 102 INVITE
Sequence Number: 102
Method: INVITE
Via: SIP/2.0/UDP 192.168.2.20:5060;branch=z9hG4bK05ac3a4e
Transport: UDP
Sent-by Address: 192.168.2.20
Sent-by port: 5060
Branch: z9hG4bK05ac3a4e
Contact: "SPA8k8Phone2" <sip:102@192.168.2.237:5160>
Contact Binding: "SPA8k8Phone2" <sip:102@192.168.2.237:5160>
URI: "SPA8k8Phone2" <sip:102@192.168.2.237:5160>
SIP Display info: "SPA8k8Phone2"
SIP contact address: sip:102@192.168.2.237:5160
Server: Cisco/SPA8800-6.1.7(GW)
Remote-Party-ID: "SPA8k8Phone2" <sip:102@192.168.2.20>;screen=yes;party=called
Content-Length: 251
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura, replaces
Content-Type: application/sdp
Message Body
Frame 87 (433 bytes on wire, 433 bytes captured)
Ethernet II, Src: Internet_1c:33:a1 (00:e0:4d:1c:33:a1), Dst: 00:24:97:f0:50:3c
(00:24:97:f0:50:3c)
Internet Protocol, Src: 192.168.2.20 (192.168.2.20), Dst: 192.168.2.237 (192.168.2.237)
User Datagram Protocol, Src Port: sip (5060), Dst Port: 5160 (5160)
Session Initiation Protocol
Request-Line: ACK sip:102@192.168.2.237:5160 SIP/2.0
Method: ACK
[Resent Packet: False]
Message Header
Via: SIP/2.0/UDP 192.168.2.20:5060;branch=z9hG4bK0141bb36;rport
Transport: UDP
Sent-by Address: 192.168.2.20
Sent-by port: 5060
Branch: z9hG4bK0141bb36
RPort: rport
From: "SPA8k8Phone1" <sip:101@192.168.2.20>;tag=as57eae9e2
SIP Display info: "SPA8k8Phone1"
SIP from address: sip:101@192.168.2.20
SIP tag: as57eae9e2
To: <sip:102@192.168.2.237:5160>;tag=cf247750d7f2b62ei0
SIP to address: sip:102@192.168.2.237:5160
SIP tag: cf247750d7f2b62ei0
Contact: <sip:101@192.168.2.20>
Contact Binding: <sip:101@192.168.2.20>
URI: <sip:101@192.168.2.20>
SIP contact address: sip:101@192.168.2.20
Call-ID: 3512588b465552ee7ec40bea27c3f72d@192.168.2.20
CSeq: 102 ACK
Sequence Number: 102
Method: ACK
User-Agent: Asterisk PBX
Max-Forwards: 70
Content-Length: 0
Frame 88 (894 bytes on wire, 894 bytes captured)
Ethernet II, Src: Internet_1c:33:a1 (00:e0:4d:1c:33:a1), Dst: 00:24:97:f0:50:3c
(00:24:97:f0:50:3c)
Internet Protocol, Src: 192.168.2.20 (192.168.2.20), Dst: 192.168.2.237 (192.168.2.237)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Status-Line: SIP/2.0 200 OK
Status-Code: 200
[Resent Packet: False]
Message Header
Via: SIP/2.0/UDP 192.168.2.237:5060;branch=z9hG4bK-e5988af5;received=192.168.2.237
Transport: UDP
Sent-by Address: 192.168.2.237
Sent-by port: 5060